Setting The Sound Mode - LG LH-TK3039Q User Manual

HT313SU-XK_WRUSLLK_ENG_6549
Adjust the audio settings
5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier's output.
[Speaker]: Select a speaker that you want to adjust.
[Size]: Since the speaker settings are fixed, you cannot change the settings.
[Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB)
[Distance]: If you connected speakers to your DVD/CD Receiver, setting the
Distance lets the speakers know how far the sound has to travel to reach
your set listening point. This allows the sound from each speaker to reach
the listener at the same time.
Press b / B to adjust the Distance of the selected speaker. (You can't adjust
front / Woofer speakers)
[Test]: Press b / B to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input '210499' and press ENTER. The password has now been cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating. For rated discs, make sure to press ENTER
after entering the password to enjoy it.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area's standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 16.
Adjust the others settings
PBC (Playback Control) – Playback control provides special navigation fea-
tures that are available on some disc. Select [On] to use this feature.
DivX(R) Registration – We provide you with the DivX
Demand) registration code that allows you to rent and purchase videos using
the DivX
Press ENTER when [Select] icon is highlighted and you can view the registra-
tion code of the unit.
8
Downloaded From TheatreSystem-Manual.com Manuals
6/24/08 8:24 PM
®
VOD service. For more information, visit www.divx.com/vod.
®
Page 8
Semi Karaoke – When a chapter / title / track is fully finished ,this function
shows the score in the screen with a fanfare sound.
Available discs for the Semi Karaoke function: DVD discs / DVD Karaoke Discs.
[On]: When you finished singing a score will appear on the screen.
[Off]: Fanfare and score do not appears on the screen.
- This function operate on the DVD/CD mode.
- The Semi Karaoke function is available only when a microphone is connected.
- In case that a fanfare or score appears when a chapter of a movie file is
changed during playback, set the Semi Karaoke to Off at the setup menu or
disconnect the microphone.
Bit Rate – Higher bit rates provides better sound quality, but require more stor-
age space for the same length of audio. You can select 96kbps or 128kbps on
recording.
SSR (Real Time Score) - This function will be shown the Score to real time by
checking interval and beat during sing a song in the karaoke mode only.
Select the [On] : Score bar shows 41 level while checking the interval and beat.
Select the[Off] :Score bar are not display on the screen.
-This function is not supported the Semi karaoke mode.

Setting the sound mode

VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II
Press VSM to set the virtual sound or to change sound mode repeatedly.
VSM is not available during Dvix playback.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
2Ch source
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows
and all programs encoded in Dolby Surround.
[PL II MUSIC] mode: The Music mode is for use with any stereo music recordings.
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode
except that the directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The Matrix mode may
also find use in auto systems, where the ultimate "cure" for poor FM stereo
reception may be simply to force the audio to mono.
[ON STAGE] mode: Simulates a large Concert hall
[VIRTUAL] mode:
VOD (Video On
stereo sources, optimized for stereo speakers. Listeners may experience
amazing virtual surround effects with their own multimedia players.
Realtime 3D positioned sound rendering technology with