Install Menu; Program Menu - Hyundai HLT 2601 HD Instruction Manual

Install menu

By pressing / button, select the fourth icon.
Install menu appears on the screen.
Program
By pressing / button, select Program.
Press / button to select the program number.
You can also enter a number via digit buttons
on the remote control. There are 100 program
storage between 0 and 99.
Band
Bandcan be selected either "C" or "S" by pressing
/ button.
Channel
Channel can be changed by / button or
Digit Buttons.
Colour System
By pressing / button, select Colour System.
Press / button to change the colour
systemto PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing / button, select Sound System.
Press / button to change the sound
systemto BG,DK, I,Lor LP.
Fine Tune
By pressing / button, select Fine Tune.Press
/ button to adjust the tuning.
Search
By pressing /
/ . button to start program searching.
The searchingwill stop when a signal is found.
You can also enter a frequency value directly
by pressing the digit buttons.
VCR (Video Cassette Recorder)
• This item can be seen in all modes except
EXT-3,EXT-5 and PC.
• If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode "on". For this, while the cursor is
on this item press the
"On".
• If you want to watch a DVD , then you must
set this item "Off".
Store Program
By pressing /
Press / or "OK" button to store the
adjustments. "Program Stored" will be displayed
on the screen.

Program menu

By pressing /
Program menu appears on the screen.
ENG - 66
button, select Search. Press
/ buttons to set it
button, select Store Program.
button, select the fifth icon.