Display Messages - Miele FashionMaster Operating Instructions Manual

Display messages

Problem
Message in the display:
 Drain valve closing
Message in the display:

Drain valve fault Switch
off/on
Message in the display:

Memory fault Switch off/
on
Message in the display:

Unplug at mains
Cause and remedy
When the steam ironing system was switched on, the
steam generator drain was open. The drain is closed
automatically during this message.
The descaling or rinsing processes have not been not
carried out properly.
 Press the  button to switch the steam ironing
system off and then back on again.
 If the fault message continues to be displayed,
contact Miele Service.
There is a fault.
 Press the  button to switch the steam ironing
system off and then back on again.
The steam ironing system must now be reset.
 Complete the steps required when using for the
first time (see "Using for the first time").
 If the fault message continues to be displayed,
contact Miele Service.
Electronic fault.
 Switch off at the wall socket and withdraw the
plug.
 Wait a while and then insert the plug back in the
socket and switch on.
 Press the  button to switch the steam ironing
system back on again.
The steam ironing system will attempt to correct the
fault itself.
 If the fault message continues to be displayed,
switch off at at the wall socket and withdraw the
plug. Contact Miele Service.
Problem solving guide
71