Asus AP2400R-E2 Service Manual page 40

9. Re-connect the 4-pin power plug
to the connector inside the
cage.
When re-connecting the power
plug, place the PCI cage close
enough to avoid pulling the
power cable.
10. Before re-installing the PCI cage
into the chassis, check that all
cables on the PCI cage bay are
properly connected and routed.
11. Take note of the two pegs on
the PCI cage bay. These pegs
should match the holes on the
cage to make sure it fits in
place.
2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0 2 - 2 0
C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y
C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y C a b l e s o n t h e P C I c a g e b a y
P C I c a g e p e g s P C I c a g e p e g s
P C I c a g e p e g s P C I c a g e p e g s P C I c a g e p e g s
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p