If...
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Shutter button
does not work.
Slide show does
not run on external
video device.
Picture is too light.
Picture is not clear.
Picture is too dark.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Try one or more the following
I
Transfer the picture to the computer
I
Turn on the camera
I
Wait until the ready light stops blinking red before attempting to take
another picture.
I
Transfer pictures to the computer (
page 13
camera (
insert a card with available memory (
For best pictures, see
I
I
Adjust the camera Video Out setting (NTSC or PAL,
I
See the external device's user's guide.
I
Move so there is at least 3.3 ft (1.0 m) between camera and subject.
I
Decrease Exposure Compensation
I
Clean the lens
(page
I
Move so there is at least 3.3 ft (1.0 m) between the camera and the
subject.
I
Place the camera on a flat, steady surface or use a tripod.
I
Turn on the flash
I
Move so there is no more than 7.9 ft (2.4 m) between the camera and
the subject.
I
Use Fill flash
(page
the subject.
I
Increase Exposure Compensation
(page
(page
2).
page 15
), switch image storage locations (
page 4
page
5.
(page
55).
(page
8).
24) or change your position so light is not behind
(page
Troubleshooting
15).
), delete pictures from the
page 26
).
page
28).
25).
25).
), or
39