Maytag DWC8240AAW Use And Care Manual page 10

Options:
Indicator Lights:
Temp Boost Sensor: The On light indicates that the dishwasher is
Press the On button to assure the water is operating.
heated to proper temperature for best cleaning The Heating Delay light indicates that the main
and drying results. If the water temperature is
wash is being extended to heat the water to
low, the main wash will be extended and the
proper temperature.
Heating Delay light will turn on.
Press the Off button to cancel the Temp Boost
Sensor.
Adding a Forgotten Item:
For best cleaning, the forgotten item should be
Fan Dry Options: added early in the cycle.
Press the Heat button to turn the heating 1. Unlatch the door and wait until the sound of
element on during the fan dry period. This circulating water stops.
", option provides faster drying.
2. Open the door and add the item.
Press the Air button to turn the heating element
off during the fan dry period. 3. Pause before latching the door. The cycle will
continue at the point it was interrupted.
To Start Dishwasher:
After loading set the dial to the desired cycle.
Press button for desired options.
NOTE: Run the water from the hot water tap to
clear the line of cold water before
starting.
Press the door until it latches. The cycle will
begin with a drain prior to fill.
PAGE 9