b
battery
c
WLAN card
d
SSD card
e
chassis frame
3
To remove the LED board:
a
Lift the latch and disconnect the LED board cable from the connector on the LED board [1].
b Remove the M2*3 screw that secures the LED board to the computer [2].
c
Lift the LED board away from the computer [3].
Installing LED board
1
Place the LED board into the slot on the computer.
2
Tighten the M2*3 screw to secure the LED board to the computer.
3
Connect the LED board cable to the connector on the LED board.
4
Install the:
a
chassis frame
b
SSD card
c
WLAN card
d
battery
e
base cover
5
Follow the procedure in
After working inside your
computer.
Removing and installing components
35