Whirlpool RF377PXY Use And Care Manual page 22

6. Push the Delay Start Time pad. The time
of day with the colon flashing will show in
the display. The Start Time Indicator
Light will light up, and the Cook Time
Indicator Light will flash.
7. Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct start
time shows in the display.
This example shows a desired start time
of 2 o'clock. The oven will automatically
shut off at 230 (the set start time plus
the set cook time).
6. Push
the Start/Enter pad. The Delay
Indicator Light will light up in the display
to indicate that the oven is programmed
to start at a later time. The Cook Time
and Start Time Indicator Lights will flash.
NOTE: You
can change a time setting
after pushing the Start/Enter pad by
repeating just Steps 4 and 5 or 6 and 7.
9. When the start time is reached,
the
Delay Indicator Light will go off, a single
tone will sound and the display will count
down the baking/roasting time in
minutes.
DELAY
22