Subaru forester 2001 Service Manual page 12

4) Install center exhaust pipe to rear exhaust pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
5) Connect connector to rear oxygen sensor.
6) Tighten bolt which holds center exhaust pipe
bracket to transmission.
Tightening torque:
30 N·m (3.1 kgf-m, 22.4 ft-lb)
CENTER EXHAUST PIPE
7) Tighten bolt which holds center exhaust pipe to
hanger bracket.
Tightening torque:
G2M0855
8) Tighten bolts which hold intercooler bracket.
Tightening torque:
9) Lower the vehicle.
10) Place turbocharger lower cover, and tighten
bolts which install the upper side of lower cover.
Tightening torque:
EN0834
11) Place turbocharger upper cover, and tighten
bolts which install the upper side of upper cover.
Tightening torque:
H2M1746
12) Lift-up the vehicle.
EX(DOHC TURBO)-11
35 N·m (3.6 kgf-m, 26 ft-lb)
35 N·m (3.6 kgf-m, 26.0 ft-lb)
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
Exhaust
S2M1723
H2M1931
H2M1930