Leave dial on "S" for single shot for most purposes. "CL" and "CH" are low and high burst modes
and generally shouldn't be used.
There is a diopter setting so that the camera view can be set for individual eyesight. Changing
the diopter DOES NOT change any of the camera pictures settings. If you use the diopter to get
a clear view through the viewfinder, please do a courtesy and reset it for the next user.
Use the "P" (Program) dial setting where the camera determines the best shutter speed and F‐stop.
Other settings such as "M" (manual), "A" (aperture priority), "S" (shutter priority) should only be used if
one is thoroughly familiar with the camera. Don't use the green camera icon with "auto" over it
because it will try using flash which is not appropriate for aerial photography.
4