Table of Contents
Advertisement
16
English
Battery status (when handle is not on charger)
Features
Pressure Sensor
35_021_1357_2_DFU-Luxury_A6_v1.indd 16
-
1 yellow LED indicates a low charge.
-
3 green LEDs indicate a full charge.
Note: If you hear two sets of five beeps and the
yellow LED of the battery level indicator flashes,
your Sonicare will turn off until placed on the
charger, where it will start to recharge.
Note: Your Sonicare will not be able to run a
brushing routine until it is fully recharged.
Note:To keep the battery fully charged at all times,
you may keep your Sonicare on the charger when
not in use.
This Sonicare model comes with the Pressure
Sensor feature activated. The Pressure Sensor
works in all 3 modes and at all 3 intensity levels.
Activating or deactivating the Pressure
Sensor feature
1
Attach the brush head to the handle.
2 Place the handle in the plugged-in charger or
sanitizer.
-
To deactivate Pressure Sensor:
Press and hold the power on/off and mode button
for 2 seconds. You hear 1 beep to indicate that the
Pressure Sensor feature has been deactivated.
-
To activate Pressure Sensor:
Press and hold the power on/off and mode button
for 2 seconds. You hear 2 beeps to indicate that
the Pressure Sensor feature has been activated.
12/08/16 10:17
Advertisement
Table of Contents
