Pfaff creative 2170 Owner's Manual page 123

Jumping over stitches
Embroidering several colors
With the Stitch information icon (A) you open a window for moving
to a specifi c stitch in a design or a combination of designs. Thus you
can jump quickly to the beginning of a specifi c area of a design and
embroider only that part.
Touch the stitch number (B) to open another window for entering a
stitch number. Enter the stitch number. If you confi rm your entry with
OK, the embroidery hoop moves to this stitch. With ESC you interrupt
the process.
With the Left arrow icon (C) you can reverse stitch by stitch, also
beyond color changes.
With the Right arrow icon (D) you can advance stitch by stitch, also
beyond color changes.
With the Reverse color by color icon (E) you move the hoop to the start
of the preceding color in a design. The color is indicated in the icon.
With the Advance Color by Color icon (F) you move the hoop to
the start of the next color to be embroidered in a design. The color is
indicated in the icon. If the last color is selected, this icon is not active.
With the Cross-hair icon (G) you call up a cross-hair cursor which
indicates the current needle position.
With the Color block icon (H) you position the needle at the start of the
current color.
In an embroidery combination, you can jump from design to design
with the Reverse design by design icon (I). If the fi rst design is selected,
or only one design is entered in the hoop, this icon is not active.
With the Advance design by design icon (J) you can jump from design
to design. If the last design is selected, or only one design is entered in
the hoop, this icon is not active.
You can change between Current position, Stitches left in the full
embroidery and Stitches left in this color block by touching (K).
Note: When you have used arcing or automatic stitch building to make a design you
can use the advance/ reverse design by design icon to move between the stitches in the
combination.
5:26
A.
K
B
C
D
I
J
E
F
H
G