Lowering The Feed Dogs; Disengaging The Idt; Removing The Knee Lift - Pfaff creative 2170 Owner's Manual

Lowering the feed dogs

The feed dogs must be lowered for hoop embroidery. To lower the feed
dogs move the slide (D) to the left.
Note: Raise the presser foot before lowering the feed dogs.
D
The thread tension is automatically set and can be adjusted for
specialty techniques.

Disengaging the IDT

The IDT must be disengaged for embroidery work.
Procedure:
Hold the IDT fi rmly at the ribbing with two fi ngers.
Press the IDT downward, then pull it away from you and release it
slowly upward until it disengages.

Removing the knee lift

The knee lift is not needed for embroidery and can be removed. To
remove the knee lift just pull it out of the hole.
5:11