CONTROL FUNCTION
Engine switch
The engine switch controls the ignition system.
1 " 7 " (ON)
Ignition circuit is switched on.
The engine can be started.
2 " 5 " (STOP)
Ignition circuit is switched off.
1
The engine will not run.
2
763-084f
Oil warning light (red)
When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops
automatically. Unless you refill with oil, the engine will
not start again.
TIP
If the engine stalls or does not start, turn the engine
switch to " 7 " (ON) and then pull the recoil starter. If
the oil warning light flickers for a few seconds, the
engine oil is insufficient. Add oil and restart.
700-027c
AC switch (N.F.B.)
The AC switch (Non-Fuse Breaker) turns off automati-
1
cally when the load exceeds the generator rated out-
put.
1 "I" (ON)
2
2 " 3 " (OFF)
763-252a
NOTICE
Reduce the load to the specified generator rated
output if the AC switch (N.F.B.) turns off. If it turns
off again, consult a Yamaha dealer.
– 11 –