Switching On The Appliance; Setting The Temperature - Siemens KG33NNW30G Instructions For Use Manual

Kg..n..
Table of Contents

Advertisement

Controls
Fig. "
* Not all models.
1
Temperature selection button
The required temperature is set
with this button.
2
Super display
Illuminates when super cooling
and super freezing is on.
3
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
4
Eco mode indicator
This lights up when the eco mode
is switched on.
Switching on the
appliance
Fig. "
1. Insert the plug in the socket.
2. A warning signal sounds. The
temperature display 3 flashes.
3. Press the temperature setting button
1. The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 3 is lit.
The factory recommends the following
settings:
Refrigerator compartment: medium
setting
Freezer compartment: -18°C
Store delicate foods in the refrigerator
compartment.
Operating tips
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting the
temperature
Refrigerator compartment
Turn temperature controller, Fig. !/8, to
the required setting.
We recommend the setting in line with
the marking.
Changing the setting clockwise will lower
temperatures in the refrigerator
compartment.
At a room temperature below 16°C,
slightly increase the temperature setting
in the appliance. At a room temperature
above 32°C, slightly reduce the
temperature setting in the appliance.
en
9

Advertisement

Table of Contents
loading

Table of Contents