Overview; System Information; Resource Usage; Port Status - Axis Camera Station S2016 User Manual

AXIS Camera Station S20 Appliance Series

Overview

Overview
The Overview contains three panes where you can find product information and status:
•

System Information

•

Resource Usage

•

Port Status

System Information
This pane provides basic identity information about your switch.
Model - The device's model name.
Serial Number - The device serial number is useful for maintenance or when tracking the individual device.
Firmware Version - See which firmware that are installed to determine whether you need to upgrade the switch firmware.
Port Counter - A count on the number of network ports the device supports, including a corporate uplink port.
Max PoE - The total power available for power over ethernet (PoE) devices.
Resource Usage
This pane tells you how key switch resources are being used.
Total PoE Usage - The Total PoE bar graph shows how much power (in watts) is being consumed by PoE devices attached to the
switch. Once the maximum power has been reached, the devices cannot provide any further power.
PoE Status - PoE Status indicates whether PoE is enabled and how many ports have been enabled to support PoE.
ACL Status - Indicates whether ACL (Access Control List) is enabled and how many ports are enabled with this added security feature.
ACL binds a specific MAC address to a port, preventing traffic (sent or received) from devices with other MAC addresses.
Port Status
Port Status displays operational details for each switch port and U1. This area is helpful when you want to know all the key
operational parameters of each port. From this pane you can disable individual switch ports and improving security for unused ports.
Port # - The port number to which the selected device is connected.
Link State -
• Up indicates that a device is connected to this port
• Down indicates that no device is connected
Link Speed - The current negotiated link speed for each port.
Transmit Rate/Receive Rate - An overview of traffic load on each port showing the average data rate in megabits per second for
outbound and inbound data on the port.
Power Draw - The average power (in watts) being drawn via PoE by the device attached to the port.
PoE Enabled/ACL Enabled - Enabled/disabled status of each port. To improve security, it is recommended to only enable PoE for
those ports with active PoE devices. ACL should be used to prevent unauthorized devices from being placed on the network.
6