Sony CUH-ZVR1 Instuction Manual page 9

Follow the instructions on the PS VR setup screen to adjust
the camera position and angle, so that you are in the best
position (in the centre of the Play Area) to play in VR mode. If
you go outside of the Play Area while using VR mode, a
warning will appear on the VR headset screen.
Hint
If the VR headset is not detected correctly, press and hold the
(PS) button on the controller, and then select [Adjust
PlayStation VR] > [Confirm Your Position] from the quick menu that
appears. Adjust the camera position and angle.
Your position while using the VR headset
Remain seated wherever possible. For applications with a
standing mode, follow the application instructions carefully.
PS VR settings
To configure PS VR settings, go to the PS4™ system's function
screen, and then select
[PlayStation VR].
Hints
• These settings are available only when PS VR is connected to the
PS4™ system.
• You can also configure some settings from the quick menu that
appears when you press and hold the
controller.
• For more information about setting up your PS VR, refer to the
user's guide for the PS4™ system. Select
(User's Guide) from the function screen.
(Settings) > [Devices] >
(PS) button on the
(Settings) >
Parental controls
The PS4™ system contains settings that parents or guardians
can configure as necessary to restrict use of this product by
children. To restrict use, go to the PS4™ system's function
screen, and then select
[Restrict Use of PS4 Features] > [PlayStation VR] > [Do Not
Allow].
Hints
• The parental control passcode is required to configure settings.
• Restrictions that are set in place apply to all users of the PS4™
system.
(Settings) > [Parental Controls] >
9