GE Multilin G650 Manual page 232

5 SETTINGS
Signals relative to breaker failure provided by the relay can be viewed at Actual> Status > Control Elements > Breaker
Failure, and they are as follows:
Table 5–85: BREAKER FAILURE STATUS
BKR FAIL INITIATE
BKR FAIL NO CURRENT
BKR FAIL SUPERVISION
BKR FAIL HISET
BKR FAIL LOWSET
INTERNAL ARC
BKR FAIL 2nd STEP
GEK-113285A
BREAKER FAILURE STATUS
BKR FAIL INITIATE
BKR FAIL NO CURRENT
BKR FAIL SUPERVISION
BKR FAIL HISET
BKR FAIL LOWSET
INTERNAL ARC
BKR FAIL 2nd STEP
External signal for breaker failure initiation. (Configurable at settings> Relay
Configuration > Protection Elements).
Signal for breaker failure without current
Signal for supervision level breaker failure (retrip)
Signal for high-level breaker failure
Signal for low-level breaker failure
Signal for internal arc
Signal for Second level breaker failure (high and low)
G650 Generator Protection & Control System
5.5 CONTROL ELEMENTS
5-89
5