Pentax PHOTO Browser 3 Operating Manual page 78

76
Tool Bar
This executes functions or sets various settings of PENTAX PHOTO
Laboratory 3.
1 2
Number Icon (button)
1
Open
2
Save
3
Full Auto Processing
Custom Processing
4
Recall Adjustment
5
Save Adjustment
6
Undo
7
Redo
3 4 5 6
Content
This selects the image file for processing in
PENTAX PHOTO Laboratory 3. Only applies
when the software is started as standalone. This
cannot be used when PENTAX PHOTO
Laboratory 3 is started within the PENTAX
PHOTO Browser window. (p.79)
This performs RAW file processing and saves it
with the specified save mode and image size.
(p.90)
This appears when Full Auto Processing is set.
Performs processing using the processing
conditions set in the RAW file.
Click
This is displayed when Custom Processing is set.
This performs processing using the processing
condition settings specified by the user. The
processing conditions are set using the White
balance panel, Tone panel, Other settings panel,
Lens aberration correction panel and Noise
Reduction panel. (p.84)
When in Custom Processing mode, this recalls a
saved adjustment file. (p.92)
This saves the processing conditions set in
Custom Processing mode as an adjustment file.
(p.91)
When in Custom Processing mode, use this
function to cancel the previous operation. You
can undo up to five operations.
When in Custom Processing mode, use this
function to redo an operation that was cancelled
with the [Undo] button.
7 8 9
to select or from the pull-down menu.
10 11 12