Pentax Optio 330 GS Operating Manual page 21

c
Use the four-way controller (
to change the day and press the
four-way controller ( ).
and
and below the year.
v
Repeat Step
[year] [hour] and [minutes].
b
Use the Display button to select
the 12-hour or 24-hour display
format.
n
When you have finished the
settings, press the Playback/OK
button when the clock reaches 00
seconds.
The camera is ready to take a picture.
When you set date and time except the initial settings,
press the Playback/OK button again after press the
Playback/OK button when the clock reaches 00 seconds to
return to capture mode.
• When the initial settings screen is displayed, you can cancel
memo
the settings operation and switch to Capture mode by
pressing the MENU button. If this is done, the initial settings
screen will be displayed next time you turn the camera on.
• You can change the settings after they have been made.
Refer to "Changing the Date/Time" (p.96).
will be displayed above
c
to change the
)
Date Adjust
10 / 23 / 2002
00 : 00
12/24
Date Adjust
10 / 23 / 2002
00 : 00
12/24
Date Adjust
10 / 23 / 2002
11 : 00 PM
12/24
19