Sprint PPC 6600 User Manual page 111

To host a Personal Area Network:
1. From Bluetooth Manager > tap New > Connect > Join a
personal network > tap Next.
2. On the next wizard screen select Host a personal network,
and then tap Next.
3. Add remote devices to the Bluetooth Personal Area Network,
if desired:
Tap the Add button and select the device to be added.

Add additional devices, if desired (up to eight total,

including the host).
After all the desired devices have been added, tap OK to
complete the setup and close the wizard.
To join a Personal Area Network:
1. From Bluetooth Manager > tap New > Join a personal network
> Next. (The Bluetooth Browser displays.)
2. On the next wizard screen select Join a personal network,
and then tap Next.
3. Select the host of the personal area network, and then tap
Next to establish a connection to the personal area network.
(If asked to enter IP network settings select
Use server-assigned IP address, then tap OK
The network host's authorization and authentication settings, and/or its
Personal Area Network service availability, may prevent you from joining
Note:
the network. Any application that requires a network connection can use
the Personal Area Network connection.
My Shortcuts
The default tab on the Bluetooth Manager is My Shortcuts. This
screen displays the icons that have been created for connections to
other devices. The icons provide visual feedback about the status
of the connection to which they are linked.
Section 8: Getting Connected
.)
106