Teka dg-2 Instruction Manual page 11

Ceiling mounting kitchen hood
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Index
Description of the appliance
Instructions for use
Problem solving
Sizes and specifications
Installation
Active charcoal filters
Description of the appliance
A
Electronic programmer control box
with iluminated buttons to control
speed and light.
B
Metal filters.
C
Lamp with two bulbs - 20 W (G-4).
Vertically adjustable tubecovers.
D, E
F
Decorative part.
Page
You may control the kitchen hood by
operating the controls as shown in the
11
diagram.
11
12
12
12
13
13
13
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
Proceed as follows:
1.- Choose the required speed.
2.- Press "timer". The light will begin to flash.
The duration of the "timer" is 10 min.
During the programmed time, fan speed can
be changed.
The intensive speed is autoprogramed and
will change to speed 2 after approximately 10
minutes.
Instructions for use
Programming timer
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nc1-90

Table of Contents