Bypassing Zones - DSC escort5580 User Manual

Voice assisted security control

Hide thumbs Also See for escort5580:

Table of Contents

Bypassing Zones

Zones may be bypassed when access is required to part of the protected area when the system is

armed. Bypassed zones will not cause an alarm.

Zones can only be bypassed when the system is disarmed.

How to Bypass Zones

To bypass zones, access the security system using the steps described in the Accessing Your

Security System section of this manual.

Select a Partition as described in the Accessing Partitions section of this manual.

When the system announces

"To turn {System} on enter your Access Code. For more options press [

"To turn {System} on enter your Access Code. For more options press [ ]." ]." ]." ]." ]."

"To turn {System} on enter your Access Code. For more options press [

Press the [ ] Key. The system will announce the list of System Options. When the system announces

Press the [1] Key.

If your system requires that you enter an Access Code to bypass zones, the system will announce

Enter your Access Code.

The system will announce the Zone Bypass Menu:

To bypass a zone enter the one/two digit zone number at this point. Once the one/two digit zone

number has been entered the system will announce.

Zone bypasses are automatically removed each time the system is disarmed and must be reapplied

before the next arming. For security reasons your installer may program your system to prevent the

bypass function from affecting certain zones.

"For Zone Bypassing Press [1]"

"Enter Your Access Code"

"There are no Zones Bypassed.

To exit Press [#]".

" There are XX zones bypassed,

Zone XX, Zone XX,

To exit press [#]"

Table of Contents