Panasonic WV-ASC970 Operation Manual page 8

Main Screen
Server Status Display
The main screen displays following statuses.
ACTIVE : ASC970 Server is in active status.
STANDBY : ASC970 Server is in standby status.
STARTUP : ASC970 Server is in startup procedure.
ACTIVE (yellow) : Both ASC970 Servers' states are same, need to re-set the server status by
ASC970 Admin Console and then reboot the servers.
ACTIVE (red) : A critical error has occurred in the server and switchover will be executed.
( ! ) : The RM failed to retrieve server information and the network connection
should be checked.
Server Redundant Mode Display
The main screen also displays redundant mode as MANUAL or AUTO.
MANUAL : Switchover can be executed by RM or ASC970 Admin Console manually.
AUTO : Switchover will be executed automatically by ASC970 Server itself.
Switchover
If the server is in MANUAL mode, you can switch the server by the RM. The server will not switch itself.
1. Move the cursor to desired unit number row on MAIN screen and Right-click.
2. Then the "Switch over" button will appear.
Switch over list
3. Click it and then "SWITCH OVER" window will appear.
Note:
The high-light will be turned off after for a while and need the Right-click again.
8
Filed
ID Unit ID registered in ASC970 Admin Console
Name Unit Name registered in ASC970 Admin Console
Main server status
Main
Backup Backupserver status
Mode
Redundant Mode
Description