Notes On Timer Recording Setting; To Watch Another Video Until Recording Starts - Sanyo C20VT11-M Instruction Manual

c1
5 After you have finished setting the first programme,
press the OK button. The cursor will move down
one line. You can now set the remaining three
programmed.
+
PROGRAMMING 10.06 13:32
Red
DATE START STOP PR
11 .06ED21 .30 23.1502 LP
?
---- --- ---- -- SP
If this is the last programme to be set, press the OK
button again. The VCR will enter timer recording
stand - by mode and the green Timer Recording
Indicator will light.
If you want to set another programme while the VCR
is in timer recording stand - by mode, press the
TIMER REC ON/OFF button to temporarily cancel
timer recording stand - by mode and repeat the
above procedure from step .
•1
6 When finished 4 programmed, press the OK button.
The VCR will go into timer recording stand-by mode
and Timer Recording Indicator(green) will light.
TIMER REC ON
When the settings are completed...
Switch off the power by pressing the Remote Control's
Power ON/OFF ~ button or the TV's Power ON/OFF
(Q button. The image and sound will be switched off
but the VCR section will start recording at the
programmed date and time.
Notes:
To stop a timer recording, press the STOP button.
If there is a power failure during a timer recording, the
recording will stop. If the power is returned to the VCR
within 60 minutes, the recording will resume if the stop
time has not yet been reached,
I
Notes on timer recording setting
t
The timer recording will not operate if...
NOvideo
cassette
tape is loaded when going into timer
stand-by mode.
"NO TAPE" will displayed on the screen.
I
NO TAPE!
I
J
!
A cassette with no erasure-prevention tab is loaded.
The cassette will be ejected.
Programme priority
If several timer recordings have overlapping recording
times, the recording with the earliest start time will be
recorded first, until the end.
19:00 20:00 21:00 22:00
23:00
'ro~F'':":'
\
I
Programme-3
I
Recording
start
/
Recording
end
These positions will not
be recorded
~To watch another video until recording starts I
During timer recording stand - by mode, the VCR cannot
be operated. If a VCR button such as the PIAY p button
is pressed, 'TIMER REC ON" will be displayed for a few
seconds.
If you want to watch another video until recording starts,
press the TIMER REC ON/OFF button to temporarily
cancel timer recording stand - by mode. After performing
the desires VCR operations, press the TIMER REC
ON/OFF button again to set the VCR back to timer
recording stand - by mode.
~
,,MER
dREb
o
"EC
#
SP/LP ATR R EMOR)
00
mxx~~
.TIMER
REC
ON/OFF
TIMER REC ON
A
v
TIMER REC OFF
If the timer recording stand-by mode is left cancelled, the
green Timer Recording Indicator will start to blink 5
minutes before the programmed start time. Stop VCR
operation and press the TIMER REC ON/OFF button to
set the VCR back to timer recording stand-by mode.
Timer Recording Indicator(green)