Table of Contents
Advertisement
To select a
2.
WASH WATER TEMPERATURE
pull r,ar,
HOT WATER can be selected
only
in the REGULAR HEAVY Cycle. Turn the
Control Knob to12 or 14 minutes in the
REGULAR HEAVY Cycle.
All rinses use cold water. This saves
energy
and helps prevent
wrinkles
from setting
into fabrics.
To select a
3.
WATER LEVEL
pull 5,ar,
WARM WATER can be selected
by
turning the Control Knob to 8 or10 min-
utes in the REGULAR HEAVY Cycle.
l
A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 or 8 minute setting in that cycle.
HIGH WATER LEVEL. The washer will
automatically
fill to its highest level,
(about17.2
gals./651
L), when the
Control Knob points to a FILL area.
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets it
for a shorter wash time.
1. Push the Control Knob in and turn it
clockwise
to a FILL area in the cycle
you want.
2. Pull the Control Knob out; the washer
will start to fill.
3. When the washer reaches
the de-
sired water level, push in the Control
Knob and slowly turn it past the FILL
area. Pull out the Control Knob to
start the washer.
For all rinses, the washer
fills to its
highest
level wlth cold water.
5
Advertisement
Table of Contents
