Honeywell DT8012F4 Installation Instructions

Motion sensor

Download this manual

DT8012F4 / DT8012F5 DUAL TEC

QUICK LINKS

Mounting Location Guidelines

Open the Sensor

Mount the Sensor

Sensor Components and Settings

Mounting location guidelines:

• The optimal range is obtained at a mounting height of 2.3 m (7' 6").

• Allow a clear line-of-sight to all areas to protect.

• Do not directly face windows.

• Avoid close proximity to moving machinery, fluorescent lights and heating/cooling sources.

• For use in applications with pets up to 45 kilograms (100 pounds).

Motion Sensor – Installation Instructions

Wire the Sensor

Walk Test the Sensor

Detection Patterns

Relay Operation

Troubleshooting

Sensor Specifications

Accessories

Approval Listings

[EN] = approved installation.

1. Turn the arrow to point to the Unlock symbol.

2. Press firmly on housing latch.

3. Gently separate the front and rear housing.

Page 1 DT8012F4 / DT8012F5 DUAL TEC Motion Sensor – Installation Instructions ® QUICK LINKS Mounting Location Guidelines Wire the Sensor Troubleshooting Open the Sensor Walk Test the Sensor Sensor Specifications Mount the Sensor Detection Patterns Accessories Sensor Components and Settings Relay Operation...
Page 2 - 2 -...
Page 3 Power Walk Test Normal Trouble Slow Fast Blink Alarm Alarm Blink Yellow Microwave Microwave Green 1. Close the sensor and apply power to the sensor. Initialization is complete when the LED stops flashing slowly (about 30 seconds). 2. Walk through the detection area and observe the LED. 3.
Page 4: Troubleshooting
Please contact your local authorised Honeywell representative for product warranty information  2014 Honeywell International Inc. Honeywell and DUAL TEC are registered trademarks of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved.

Dt8012f5