Scanner - GE RPV311 Technical Manual

Chapter 12 – RPV Tools
1.1.2 Uninstalling
1.2

Scanner

1.2.1 Description
RPV311-TM-EN-7
Processor 1 GHz or higher;
Minimum 512 MB RAM memory;
Minimum 500 MB free space on disk.
Only the administrator of the system can install the RPV Tools. To check if the user is
the administrator click S
computer administrator information will show below the login. If the user is not the
computer administrator contact the manager of your system.
To install the software, follow the procedures below:
1. Insert the CD-ROM in the CD-ROM unit of the PC;
2. Access the CD-ROM unit, double click on the rpv-software. install-en-
swvrr.msi file (for example: rpv-software.install-en- 04A00.msi);
3. The screen RPV Tools Setup will appear. Accept the terms in the License
Agreement and click <I
software;
4. After installation is finished, click <F
system.
Four icons for quick access to the applications will be created on the Desktop and an
RPV directory will be created in the root directory where Windows is installed. For
example: C:\RPV\conftool\conf. The same applications also can be accessed by
clicking Start > Programs > RPV.
It is necessary to restart the PC to complete the removal process.
The RPV Tools installation is in the same disk where Windows is installed.
The installation process takes up to 5 minutes.
To uninstall the software, click S
P . And then select RPV T
ROGRAMS
the A P
DD OR REMOVE ROGRAMS
The removal process takes about 4 minutes.
The directory containing the files will not be removed.
The Scanner is a tool that searches for the records in several pieces of equipment; it
transfers and saves them in an organized manner on the user's PC. The Scanner does
a recurrent scanning of the equipment's records, meaning that it scans all the pieces
of equipment and, after some programmable period of time, it starts the scanning
again.
> S > C
TART ETTINGS ONTROL
>. Wait for the complete installation of the
NSTALL
INISH
> S > C
TART ETTINGS
on the list and click <R
OOLS
window.
P > U . The
ANEL SER ACCOUNTS
> and then click <Y > to restart the
ES
P > A
ONTROL ANEL DD OR REMOVE
> then click <Y
EMOVE
RPV311
> on
ES
166