Allowed Number When Phone Locked; Change Lock Code - Nokia 2855 User Manual

When the device is locked, you can still call the official emergency number
programmed into your phone.
1. In the standby mode, select
2. Enter the lock code, and select OK.
3. Select Phone lock
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the
phone on.
If you select Lock now, you must enter your lock code before the phone will
function normally. After the lock code is accepted, your phone functions normally.
Call not allowed appears if you attempt to place a call while your phone is locked.
To answer a call with phone lock on, select Answer, or press the call key.

Allowed number when phone locked

With phone lock on, the only outgoing calls you can make are to the emergency
number programmed into your phone (for example, 911) and the numbers stored
in the Allowed no. when phone locked
1. In the standby mode, select
2. Enter the lock code, and select OK.
3. Select Allowed no. if lock active
4. Enter the phone number, or select
phone book; select OK.
To place a call to an allowed number when the phone is locked, enter the allowed
number and press the call key.

Change lock code

When changing the lock code, avoid using codes similar to emergency numbers
such as 911 to prevent accidental dialing of an emergency number.
If you enter an incorrect lock code five times in a row, your phone may ask you for
the security code. By default, the security code is the five-digit number, 12345.
Note: If you enter the wrong lock code five times in succession, your
phone will not accept your current lock code for 5 minutes. This occurs
even if when you power down the phone between incorrect attempts.
To change the phone lock code, do the following:
1. In the standby mode, select
Menu > Settings
and one of the following:
location.
Menu > Settings
> Assign
Search
Menu > Settings
> Security.
> Security.
and one of the three slots.
to retrieve the number from the
> Security.
S e t t i n g s
69