Pioneer DVH-P580MP SERIES Service Manual page 67

1
QQ
3 7 63 1515 0
EDC1
mode
A
0000 0000
RIGHT
Layer 0
selected
0000 0000
1003 0000
RIGHT
2
Layer0:10** ****
ID
Layer1:11** ****
designation
** ****: ID specification value
B
3
Layer0:20** ****
EDC1 start
Layer1:21** ****
** ****: Present ID value
F-close and F-search cannot be executed, unless LD-ON is set.
[If F-close isn't executed within 9 seconds after LD-ON, it switches to LD-OFF automatically.
And even if F-search is executed within 9 seconds after LD-ON, it also switches to LD-OFF.]
Please carry out F-close after carrying out power-off at once and carrying out power-on again,
when carrying out F-close after performing F-search.
The track number designation is selected from the track numbers already prepared for selection.
Switching to cyclic operation is made at step 1, and the decision is finalized (entered) in step 3.
For CD: Tracks 1, 4, 10, 11 and 32.
C
For DVD: Tracks 1, 4, 10, 11, 32, 64 and 100.
Method for designating an ID address:
• A number of digits are determined through commands RIGHT and LEFT. Numerical UP/DOWN operations are performed TE
L 13942296513
through commands 1 and 2. The decision is finalized (entered) with command 3.
Display
Error Code List
Error status from
DVD microcomputer Contents
D
0X50 Mecha. error
0X40 No disc
0X30 The temperature is abnormal Thermal Protection in Motion
0X20 Read error
0XE2 Non-playable disc
0X90 Different region disc
0XFF Undefined error
Error code of read error(Part of XX)
Error Code Contents
E
0X99 Data cannot read
0X80 The address cannot be found Please confirm the disc
0X90 Focus error
0X91 Spindle lock NG
0X92 Carriage home NG
0X93 FOK error
0X94 ID/Subcode cannot be read
0X95 High spindle rotation
www
0X96 Row spindle rotation
0X98 TOC cannot be found
0X9A AV chip error
0X9B RecaveryNG(BE)
F
60
1
http://www.xiaoyu163.com
2
EDC2
mode
LEFT RIGHT
Layer 1 Layer 0
selected selected
0100 0000
1103 0000
RIGHT
2
designation
3
EDC2 start
Display
No display
No display
Error-02-XX
NON-PLAYABLE DISC
DIFFERENT REGION DISC
Error-FF
Display
Please confirm the disc
Please confirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
Please confirm the disc
Please confirm the disc
Please confirm the disc
DVD is stopping because mechanism detected abnormality
x ao
Please confirm the disc
y
DVD is stopping because mechanism detected abnormality
. i DVD is stopping because mechanism detected abnormality
DVH-P5650MP/RC
2
http://www.xiaoyu163.com
3
8
0000 0000
LEFT
Layer 1
selected
0000 0000
0100 0000
1003 0000
1103 0000
Layer0:10** ****
ID
Layer1:11** ****
** ****: ID specification value
Layer0:20** ****
Layer1:21** ****
** ****: Present ID value
Q Q
3 6 7
u163
3
4
2 9 9 4
1 3 1 5 0 5 8 2 9
m
co
.
4
2 8
9 9
9 4 2 8 9 9