Video Signal Section Troubleshooting - FUNAI LF320EM4 A Service Manual

[Video Signal Section]
FLOW CHART NO.1
The key operation is not functioning.
Replace the Digital Main CBA Unit.
FLOW CHART NO.2
No operation is possible from the remote control unit. (Operation is possible from the unit.)
Replace the Digital Main CBA Unit.
FLOW CHART NO.3
Picture does not appear normally.
Yes
Yes
Yes
Yes
No
Replace the Function CBA Unit.
No
Check AL+3.3V line and repair it if defective.
No
Replace the Function CBA Unit.
No
See FLOW CHART NO.5 <P-ON+21V is not output.
[Power Supply Section]>
8-3 FL14.10ATR