Braking - Acura RLX Sport Hybrid 2016 Owner's Manual

DRIVING
SPORT Mode
SPORT mode increases engine performance and
handling, which is suitable for driving on hills or
through curves on mountain roads.
Press the SPORT button behind the Drive (D)
button to turn Sport mode on or off.
Sequential Mode
Use the paddle shifters to change between 1st and 7th gears without removing
your hands from the steering wheel.
(-) Paddle shifter:
Pull to shift down
to a lower gear.
When D is selected: The vehicle goes into sequential shift mode momentarily,
and the gear indicator comes on. When you start driving at a constant speed,
sequential shift mode automatically switches off, and the gear indicator goes off.
Hold the (+) paddle shifter for two seconds to return to normal drive.
When D is selected (with SPORT mode): The vehicle goes into sequential shift
mode, and the M (sequential shift) indicator and gear indicator come on. Shift
gears up or down using the paddle shifters.
To cancel this mode, press the SPORT button (see page 84) or pull the (+)
paddle shifter for a few seconds. When sequential shift mode is canceled, the M
indicator and gear indicator go off.
84 |
(+) Paddle shifter:
Pull to shift up to a
higher gear.
M (sequential mode)
indicator
Sequential mode
gear indicator
Gear position
indicator

Braking

Slow down or stop your vehicle, and keep it from moving when parked.
Foot Brake
Press the brake pedal to slow down or stop your
vehicle from moving.
Brake Assist System
During hard or emergency braking, the system increases braking force. The brake
pedal may move slightly or make a noise; this is normal. Continue to hold the
brake pedal firmly down.
Anti-Lock Brake System (ABS)
During hard or emergency braking, the system rapidly pumps the brakes to
prevent wheel lockup and help you maintain steering control. The brake pedal
may pulsate slightly during ABS operation; this is normal. Do not pump the brake
pedal, and continue to hold it firmly down.
NOTICE
The ABS may not function correctly if you use an incorrect tire type and size.
Electric Parking Brake
Keep your vehicle from moving while parked using a simple switch.
To apply: Pull up the switch. The PARK indicator
appears in the instrument panel.
To release: Press the brake pedal and make sure
your seat belt is fastened. Press the switch down to
release.
You can also lightly press the accelerator pedal if
your seat belt is fastened and the vehicle is on and in
Drive (D) or Reverse (R).
DRIVING
Brake pedal
| 85