Removing The Base Grille; Changing The Light Bulbs; Caring For Your Refrigerator - Whirlpool ET22DKXDB00 Use And Care Manual

Removing the base grille
To remove the grille:
1.
Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3.
Do not
remove
Tech Sheet
fastened behind
the grille.
To replace the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 16.
Condenser
I
-L- Defrost pan
t
Support
tabs
grille
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb or removing a light
shield for cleaning, either unplug the refrigerator or
disconnect the electriiity leading to it at the main
power supply.
Failure to do so could result in electrical shock.
To change the refrigerator light:
1.
Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove bulb.
3. Replace with a 60-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change freezer light:
1.
Disconnect refrigerator from power supply.
2. Grasp top and bottom of light shield.
3. Squeeze and pull light shield out.
4. Replace with
a
25-watt appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE:
Not all commercial appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with one of the
same size and shape.
16