Kia 2015 Rio Owner's Manual page 406

• 5 door
1.Turn off the engine.
2.Open the tailgate.
3.Loosen the light assembly retain-
ing screws with a cross-tip screw-
driver.
4.Remove the rear combination light
assembly from the body of the
vehicle.
OUB071037
5.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6.Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7.Insert a new bulb by inserting it into
the socket and rotating it until it
locks into place.
8.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9.Reinstall the light assembly to the
body of the vehicle.
OUB071038
Maintenance
7 75