Voice Recognition Mode; Name; Voice Tools Menu; Voice Memo - Audiovox CDM-8910 Owner's Manual

VOICE RECOGNITION MODE

Voice Recognition (VR) enables you to place calls using your voice
and to record voice memos.
1 Press and hold until your cellular telephone
turns to Voice Recognition mode.
If no recorded voice dial, "No entries recorded" message
will be displayed. (Refer to page 96 for how to set one up.)
2 "Please say the name after the
prompt tone" will be displayed
and you will hear "Name please".

NAME

C
H 1 Press and hold until your cellular telephone
turns to Voice Recognition mode.
5
2 If you say a name or tag that is already in the
phone book, the number and name will be
displayed and you will hear "Calling (name)."
94

VOICE TOOLS MENU

VOICE MEMO

Voice Memo allows you to record a reminder message that can be up
to 60 seconds. To record a memo:
1
To start Tools menu, press [MENU]
2
To enter a voice memo, press
3 1.1.To record a voice memo, press
Instructions will be displayed and you will
hear "Please record at the tone."
1.2.To stop recording a memo, press
or [PAUSE/RESUME].
1.3. Press [OPTIONS] after recording a voice
memo to "Re-record", "Review" or "Save."
1.4. Select "Save" to input a "Voice Memo" caption,
then press . If not given a name, identify
the voice memo with default to untitled.
(See page 31 for more information on
entering letters, numbers and symbols.)
2.To play voice memo, press .
Select the message you want to play.
Press [OPTIONS] for "Play" or "Edit Caption."
Press [ERASE] to erase the memo.
3.To play using the speaker mode, press
Select the message you want to play.
Press [OPTIONS] for "Play" or "Edit Caption."
Press [ERASE] to erase the memo.
4.To erase all voice memos, press
"Erase all voice memos?" will be displayed.
Press [YES] or [NO].
95
.
.
.
[STOP]
C
H
5
.
.