Audio; Introduction; Pci Bus Ethernet Interface; Ground - Vox WAFER-5820 User Manual

Low power gxlv-233 mmx with svga/lcd, ethernet, & audio sbc
Table of Contents

Advertisement

6

6.1 Introduction

With on-board audio interface, the WAFER-5820 can perform
high-quality stereo sound and FM music synthesis (ESFM) by
using the CX5530 audio controller. The audio interface has
functions of recording, compressing, and playing back voice, sound,
and music with a built-in mixer control. In addition, the on board
audio interface supports the Plug and Play (PnP) standard and
provides PnP configuration for audio, FM, and MPU-104 logical
devices. It is compatible with AC97 version 2.0, voice, and music
functions. The ESFM synthesizer is register compatible with the
OPL3 and has extended capabilities.
6.1.1 Audio drivers
1. Installing software driver in Windows NT
The driver was provided from the CD utility.
WinNT4.0 Audio drivers in
Wafer-5820CD\Audio\
2. Installing software driver in Win95/98
The software drivers was supported from Windows 95/98,
please set up from......
Win98\drivers\audio\cyrix\mgxsb16.inf

Audio

39
7

PCI Bus Ethernet Interface

7.1 Introduction
The WAFER-5820 provides a high performance 32-bit Ethernet
chipset which is completely compliant with IEEE 802.3 100 Mbps
CSMA/CD standards. It is both 100Base-T and 10Base-T
compatible. The major network operating system fits it. The
medium type can be set up via the RSET8139.exe program
included on the utility CD.
The Ethernet port supplies a standard RJ-45 connector on
board. To utilize the network boot feature is by incorporating the
boot ROM image files for the appropriate network operating system.
The boot ROM BIOS files are combined with system BIOS, which
can be enabled/disabled in the BIOS setup.
The 8139x utility tools all in
WAFER-5820CD\8139x\
40

Advertisement

Table of Contents
loading

Table of Contents