Peavey Classic 30 Operating Manual page 8

Front Panel
9
POWER SWITCH (1)
Switch to "ON" position to activate.
PILOT LIGHT LED (2)
Illuminates when AC power is being supplied to the unit.
EFFECTS RETURN (3)
Input for returning signals from external effects or signal processing equipment.
EFFECTS SEND (4)
Output for supplying signal to external effects or signal processing equipment.
TREBLE, MIDDLE, AND BASS EQ (5)
Passive tone controls that regulate high, mid, and low frequencies, respectively.
BOOST SWITCH (6)
Boosts the overall system gain. Depress to the "in" position to activate.
REVERB (7)
Reverberation is an echo effect. Rotate clockwise to increase the effect. Remote footswitch can control
ON/OFF.
POST GAIN (8)
Controls the overall volume level of the Lead channel. The final level adjustment should be made after
the desired sound has been achieved.
PRE GAIN (9)
Controls the input volume level of the Lead channel.
8 7
8
6
3
5 4
WARNING
THE ON/OFF SWITCH IN THIS APPARATUS
DOES NOT BREAK BOTH SIDES OF THE MAINS.
HAZARDOUS ENERGY MAY BE PRESENT INSIDE
THE ENCLOSURE WHEN THE POWER SWITCH IS
IN THE OFF POSITION.
2 1