Salton SFH 804 Instructions And Warranty
Salton SFH 804 Instructions And Warranty

Salton SFH 804 Instructions And Warranty

Versatile fan heater

Advertisement

INSTRUCTIONS AND WARRANTY
MODEL NO. SFH 804
DESCRIPTION: Salton Versatile Fan Heater

Advertisement

Table of Contents
loading

Summary of Contents for Salton SFH 804

  • Page 1 INSTRUCTIONS AND WARRANTY MODEL NO. SFH 804 DESCRIPTION: Salton Versatile Fan Heater...
  • Page 2: Important Safeguards

    Congratulations on purchasing our Salton Versatile Fan Heater. Each unit is manufactured to ensure safety and reliability. Before using this appliance for the first time, please read the instruction manual carefully and keep it for future reference. IMPORTANT SAFEGUARDS When using any electrical appliance, basic safety precautions should always be followed including the following: 1.
  • Page 3 13. The use of accessory attachments that are not recommended or supplied by the manufacturer may result in injuries, fire or electric shock. 14. A short cord is provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. 15.
  • Page 4: Parts Diagram

    28. Do not cover the heater. 29. To prevent overheating to the heater, keep the air inlet and outlet grilles free: do not hang anything in front of it or above it – there is a risk of fire. Check the grilles from time to time for accumulated dust.
  • Page 5 = “Cool air”. Only the fan is switched on. In this position you can use the cool air ventilating of the fan for summer use. = “Warm air” (1000 W) for gradual heating-up. = “Hot air” (2000 W) for quick heating-up. Switching off the heater: To switch off the heater turn the selector switch C to the position ( .
  • Page 6  Never place the appliance directly under, over, beside or near to a wall socket!  Never cover the fan heater. Do not place any items of clothing, hand towels or similar over the grille to dry. Fire hazard!  Use the device only under surveillance.
  • Page 7: Cleaning And Maintenance

    Overheating safety device To prevent the damage and risk of overheating, the built-in overheating safety device cuts off the power supply as soon as the heating elements become too hot. If this should happen: First ensure that it is not the thermostat that has switched off the heater. Set the thermostat to maximum position.
  • Page 8: Storing The Appliance

    STORING THE APPLIANCE  Unplug the unit from the wall outlet and clean all the parts as instructed above, ensure that all parts are dry before storing.  Store the heater in its box or in a clean, dry place. ...
  • Page 9: Changing The Plug

    CHANGING THE PLUG Should the need arise to change the fitted plug, follow the instructions below. This unit is designed to operate on 230V~240V current only. Connecting to other power sources may damage the appliance. Connect a three-pin plug as follows: The wires in this mains lead are coloured in accordance with the following code: Green/Yellow = Earth Blue...
  • Page 10: Warranty

    TEDELEX TRADING (PTY) LTD JOHANNESBURG TEL NO. (011) 490-9000 29 HERONMERE ROAD P O BOX 39186 BOOYSENS, JOHANNESBURG, 2016 CAPE TOWN TEL NO. (021) 535-0600 DURBAN TEL NO. (031) 792-6000 www.salton.co.za...

Table of Contents