Sensor Programming - Banner LE250 Quick Start Manual

Down and Up Buttons
Press Down and Up to:
• Access the Quick Menu from Run mode
• Navigate the menu systems
• Change programming settings
When navigating the menu systems, the menu items loop.
Press Down and Up to change setting values. Press and hold the buttons to cycle through numeric values.
After changing a setting value, it slowly flashes until the change is saved using the Enter button.
Enter Button
Press Enter to:
• Access the Sensor Menu from Run mode
• Access the submenus
• Save changes
In the Sensor Menu, a check mark
accesses a submenu.
Press Enter to save changes. New values flash rapidly and the sensor returns to the parent menu.
Escape Button
Press Escape to:
• Leave the current menu and return to the parent menu
• Return to Run mode from the Quick Menu
In the Sensor Menu, a return arrow
returns to the parent menu.
Press and hold Escape for 2 seconds to return to Run mode from any menu or remote teach.

Sensor Programming

Program the sensor using the buttons on the sensor or the remote input (limited programming options).
From Run mode, use the buttons to access the Quick Menu and the Sensor Menu. See
Menu (MENU) on page 5, and the instruction manual (p/n 185600) for more information on the options available from
each menu. For TEACH options, follow the TEACH instructions in the instruction manual.
In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized
or accidental programming changes. See the instruction manual for more information.
4
in the lower right corner of the display indicates that pressing Enter
Important: Pressing Escape discards any unsaved programming changes.
in the upper left corner of the display indicates that pressing Escape
Access
Quick Menu
See Figure 12 on page 5
Figure 11. Accessing the LE Menus
www.bannerengineering.com - Tel: +1-763-544-3164
from Run Mode
Access
Sensor Menu
See Figure 13 on page 6
®
L-GAGE LE250/550 Dual Discrete Laser Sensors
Quick Menu on page 5,
P/N 185580 Rev. C
Sensor