Commonly Used Features; Placing Outgoing Calls; Ending A Call - Polycom IP 6000 Quick Start Manual

Commonly Used Features

PLACING OUTGOING CALLS

When the phone is not in use:
1. Press the "Call" button or the "New Call" soft key.
2. Dial a 3-digit extension or telephone number.
ANSWERING AN INCOMING CALL
Press the "Call" button OR the "Answer" soft key.
REJECTING AN INCOMING CALL
Press the "Reject" soft key to immediately send the caller to the
configured forwarding number.

ENDING A CALL

Press the "Call" button OR press the "End Call" soft key.
HOLD
Placing a Call on hold:
•
While on a call, press the "Hold" soft key.
Retrieving Calls on hold:
•
Press the "Resume" soft key to resume the holding call on that line.
12