Stealth Cam STC-PX14 Instruction Manual page 9

CAMERA PROGRAMMING – CUSTOM (CONT)
DATE – (010115 default): This setting is used to give the camera the correct date to use on the
Info Bar of the images. The format is in a MM/DD/YY setup. With the MM (month) setting
blinking, use the UP and DOWN arrows to be change the setting from 1 to 12. Once this setting is
on the appropriate month, press the ENTER button to move to the DD (day) setting and it will
start to blink. Using the UP and DOWN arrows will allow the setting to be change from 1 to 31.
Again when this setting is on the appropriate day, press the ENTER button to move to the YY
(year) setting and it will start to blink. Using the UP and DOWN arrows will allow the setting to be
changed from 14 to 35. Press the ENTER button to accept all your changes and to go back to main
options menu.
TIME – (1200A default): This setting is used to give the camera the correct time to use on the Info
Bar of the images. The default format is in a HH/MM/AP setup. With the HH (hour) setting
blinking, use the UP and DOWN arrows to change from 12am to 11pm. Once this setting is on the
appropriate hour, press the ENTER button to move to the MM (minute) setting and it will start to
blink. Using the UP and DOWN arrows will allow the setting to be change from 00 to 59. Again
when this setting is on the appropriate minute, press the ENTER button to accept all your changes
and to go back to main options menu.
MODE – (PHOTO default): This setting is used to tell the camera how it should take its images or
videos. With this option blinking, use the UP or DOWN arrow key to move between the options
either PHOTO or VIDEO. Press the ENTER button to accept all your changes and to go back to
main options menu.
9
www.stealthcam.com Page
877-­‐269-­‐8490