Tray Disc - LG CM4550 Service Manual

DECK MECHANISM DISASSEMBLY
Emergency eject hole

Tray Disc

< Bottom side view >
2
< Figure C >
3. Tray Disc
1) Insert and push a flat-head screwdriver in the
Emergency eject hole (H1) at the right side, so
that the Tray Disc is ejected about 15 ~ 20 mm.
2) Pull the Tray Disc until it is locked.
(H1)
1
Tray Disc
MD Sub
Assembly
1
2
Tray Disc
< Figure D >
3) Grasp the both sides of the Tray Disc and lift
it up as Figure D, and then pull the Tray Disc
until it is separated from the MD Sub Assembly
completely.
Tray Disc
< Figure E >
Note
• When reassembling place the Guide as Figure E.
3
1
2
3
Guide