Canon IR 2420 Remote Manual page 19

3
Network Information
1
4
Check the settings of IPv4 or IPv6.
● If the machine is connected to an IPv4 network:
IPv4
● If the machine is connected to an IPv6 network:
IPv6
NOTE
For further information on IPv4 and IPv6 settings, see Chapter 2, "Connecting the
Machine to a TCP/IP Network," in the Network Guide.
5
Press
1-8
Before You Start Using the Remote UI
IPv4
IPv6
IP Address
Subnet Mask
Gateway Address
Host Name
Link-Local Address
Stateless Address 1
Stateless Address 2
Stateless Address 3
(Stop) to return to the Standby display.
Use [ ] or [ ] to select <IPv4> or
<IPv6> ➞ press [OK].
The IPv4 or IPv6 menu appears depending
on your selection.
❑
Use [ ] or [ ] to select <IP Address>,
<Subnet Mask>, or <Gateway Address>
➞ press [OK].
Repeat this step for each item to check
their settings.
❑
Use [ ] or [ ] to select <Link-Local
Address>, <Stateless Address>,
<Stateful Address>, or <Default Router
Addr.> ➞ press [OK].
Repeat this step for each item to check
their settings.