uuDisplay Mode SettingsuSwitching Display Mode Manually
Illumination
Priority
control
Sunlight sensor
2
(see your
Owner's
Manual for
location)
Dash
3
illumination
adjustment
buttons (see
your Owner's
Manual for
location)
Headlights
4
(Auto*/On/Off)
Screen color
N/A
choice
26
Operation
If the sunlight sensor detects daylight and the
headlights are turned on, the system automatically
overrides the Night display and displays the Day display
mode.
Remember: If desired, use the
override this automatic choice.
When the headlights are turned on, and you wish to
have the Day display mode, adjust the illumination to
the full brightness (beeps).
Remember: Adjust the dash brightness back to mid-
range to allow auto switching by sensing the
headlights are on or off.
When turned on, the display changes to Night display
mode. The previous three controls listed above can
"cancel" this function.
Remember: Use the
button, or adjust the dash
illumination to full brightness, to set the display to your
desired choice.
The user can select the color of the screen that will be
displayed for the Day and Night display modes
described above.
Remember: For best contrast, ensure that the map
color is white for Day and black for Night.
button to