Disassembly And Assembly Instructions - Samsung GT-E2600 Service Manual

7-1. Disassembly and Assembly Instructions

7-1-2. Assembly
1
Assemble LCD module & SUB PBA
1. Close LCD Module FPCB connector after
assembling with SUB PBA.
2. Assemble LCD module & SUB PBA. with UPPER.
- Becareful FPCB damage
3
Assemble Lower & Screw
1. Screw 4 Points.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
2
Assemble SLIDE FPCB and RCV
1. Close SILDE FPCB connector after assembling on
SUB PBA.
2. Close RCV connector after assembling on
SUB PBA.
- Becareful FPCB damage
4
Assemble FRONT & KEY PAD
1.
Detach a white tape & attach SLIDE FPCB.
=> Follow red arrow direction.
2. Screw 6 points.
3. Assemble KEY PAD
7-3
7. Level 2 Repair