Notes On The User Guide; Example Of A Menu Input - Gigaset S670 User Manual

General specifications
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency
range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power per
power channel
Range up to 300 m outdoors,
up to 50 m indoors
Base station 230 V ~/50 Hz
power supply
Environmental +5 °C to +45 °C;
conditions in
20% to 75% humidity
operation

Notes on the user guide

This section explains the meaning of cer-
tain typographical conventions that are
used in this user guide.

Example of a menu input

The steps you need to perform are shown
in abbreviated form in the user guide.
This is illustrated below using the example
of "Setting the contrast for the display".
The things you have to do are explained in
the boxes.
¢ ¢
v Ð
Display
¤
With the handset in idle status, press
on the right of the control key (v) to
open the main menu.
¤
With the q/r control key, select the
Ð icon.
Settings appears in the display header.
¤
Press the display key
function.
Settings
The Settings submenu is displayed.
¤
Press on the bottom of control key q
repeatedly until the
tion is selected.
¤
Press v or press the display key
confirm the selection.
Contrast Select and press
¤
Press on the bottom of control key q
repeatedly until the
function is selected.
¤
Press v or press the display key
confirm the selection.
r
Select contrast and press the
display key
¤
Press on the right or left of the control
key to set the contrast.
¤
Press the display key
the selection.
a
Press and hold (idle status).
¤
Press and hold the end call key until the
handset returns to idle status.
Notes on the user guide
to confirm the
§OK§
menu func-
Display
to
§OK§
.
§OK§
Contrast menu
to
§OK§
.
§Save§
to confirm
§Save§
55