1
- Remove screws attached to stand by coin or (-) driver.
- Disassembly Stand from Set.
3
- Disassembly Back cover after press the battery as pull the
edge of Back cover by hand as the picture.
5
AL Tape
- Divide all AL TAPES and connectors from Metal Frame.
7
-Remove the serews between metal frame and cabinet.
DISASSEMBLY
2
- Remove the battery.
4
- Remove Speaker's screws of both sides.
6
AL Tape
- Remove the POWER PCB screw.
8
- Press latches on top-center and both side of cabinet and
then disassembly metal frame from the cabinet.
- Remove the screws on both side of metal frame,
disassembly metal frame and module.
- 9 -