Table of Contents
Advertisement
View
Angle
Remote
Adjust
4.0
REAR PANEL DESCRIPTIONS
Power Supply
1.
Required when using a 5-pin
Use onfy the
16-16.5
Caution: Use
the optional16.5
only
be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure
to use the correctpowersupply
performance, and/or non-operation.
View Angle Adjustment
2.
This adjusts the view
Out
3.
MIDI/Remote
Used when connecting to an effects unit. Use a standard 5-pin MIDI cable with effects units other
than the Peavey Tube Fex or TransFex 212. When using the Tube Fex or TransFex 212, use the 8-pin
MIDI cable provided.This
operation, and it
Control Voltage
Jacks
4.
The CC6jacktransmits
transmit
Controller 7
Peavey
Electronics
Corporation
Control
Voltage
cablewith MIDIequipment otherthan theTube FexorTransFex
MIDI
volt AC 1,000 mA adaptor, Peavey part#70900660, available as an option.
power supply for this product. If the (optional) power supply must
volt
could
of the LCD display to provide the most comfortable viewing
angle
Jack
you to usethe PFClO ProfessionalMID Foot
connect the PFC 10 to the Phantom power supplied from the Tube Fex or
will
Controller 6 when used with a CV
(volume) when used with
or potentiometer. Use the CC7jackto
pedal
CV
or
potentiometer.
a
pedal
angle.
"intelligent"
Controller's
Advertisement
Table of Contents
