Advertisement
IV.
EMAIL SETUP AND TROUBLESHOOTING
(NON-GMAIL)
NEW EMAIL ACCOUNT SET-UP
If you are setting up a business Microsoft Exchange email account then your IT
Department should provide you with instructions.
To set up your own ISP or on-line email account make sure you have your account
settings ready just as you would use on a PC. You may need to contact your email
provider to obtain these. Then follow the instructions below:
1.
Press the
Home Key
to ensure you are at the main (home) screen
2.
Tap the
Applications Icon
on the screen
3.
Tap
Email
(this may also be on the Home Screen)
4.
If this is the first email account then you will be presented with a
screen. If you already have another email account set-up then press the
tap
Settings
and tap
Add
Account.
5.
Enter your account details as appropriate. If you are not using a common ISP or online
service then you may need to enter Manual setup.
6.
Follow the screen prompts to complete setup. Again, you may need to refer to your
email provider for specific settings.
Once the account setup is complete it is good practice to restart your handset.
TROUBLESHOOTING EMAIL ACCOUNT
Firstly, if Email was working on the handset but has now stopped, please try
restarting the handset first to see if this helps.
Secondly, check that the internet is working on the handset by clicking on
the Browser from the Home or Applications Screen to see if a web page will
load. If it doesn't, then please follow the steps in Section iii) Internet setup and
troubleshooting.
If email is still not working you will need to remove and re-create your Email account
following the steps outlined above for New Email Account Set-up.
Select Account
Menu
Key,
V.
CONNECTING A BLUETOOTH HEADSET FOR
THE FIRST TIME
Firstly you will need to put the headset into either "Pairing Mode" or "Discoverable".
As this differs for each headset please refer to the headset instruction manual.
Now on the handset:
1.
Press the
Home Key
to ensure you are at the main (home) screen
2.
Press the
Menu Key
3.
At the bottom of the screen now tap
4.
Within the wireless & networks section tap
5.
Ensure that
Bluetooth
is
ON
(top right corner), the phone will then search for
Bluetooth devices.
6.
After a short while available devices will appear, if not then switch Bluetooth
then On to search again
7.
Tap the name of the device to begin pairing
8.
When prompted enter the
pairing code
should be in the instruction manual, often 0000)
9.
The headset should now be connected and ready to use.
TIP:
To stop using the headset just power off the headset or turn off Bluetooth on the
handset as per step 5 above. You will need to repeat steps 1-5 when you wish to use
this feature again if you turn Bluetooth off.
Settings
Bluetooth
Off
(again this is speccvific to the headset and
better
BUSINESS
Advertisement
