Nokia RM-272 Service Manual page 117

RM-272; RM-273
RF Troubleshooting and Manual Tuning Guide
5. Click Start.
6. Connect the signal generator to the phone, and set frequency and amplitude as instructed in the
Rx Calibration with band EGSM900 (step 1-3) pop-up window.
Important:
cable attenuation and module jig probe attenuation.
Issue 1
The calibration uses a non-modulated CW signal. Increase the signal generator level by
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 4 –25